Gear Heads Unite

Hope it is a good one!!

We are having a 20% off deal on all Pro Armor inventory through this Monday 9/17! Prices on my site are set to 15% off, Use the promo code from my Sig for an added 5% off your entire order! As always, shipping is FREE on any order over $100! http://www.woodwardspecialties.com/pro-armor-racing-results.htm?&source=DYM

I now have the 2013 ATV catalogs on my site for your to browse and order from. If you have any trouble finding what you need, please PM me here, or email paul@woodwardspecialties.com Marshall Distributing 2013 ATV Catalog http://www.woodwardspecialties.com/catalogasset.htm?catalogId=1840 Western Powersports 2013 ATV Catalog http://www.woodwardspecialties.com/catalogasset.htm?catalogId=1902 A full list of catalogs can be found here: http://www.woodwardspecialties.com/shop.htm

Want to know if the hydro line off the Magura or the streamline hydraulic clutches have the same banjo fittings as the front brake line does? Reason I ask is because I have a 5" riser on with +6" cables and lines. So I need to get the same length hydraulic clutch line for my Magura that's on its way. Hopefully someone can help me as this might not be such a common request.

Gents, If you are on the org chances are you've seen my build thread (still a work in progress) Since I'm joining this site late in the build I'll run down what I'm doing with it.. Whats new: Houser +2.25 LT A-Arms Houser +1.25 Swingarm Houser Airbox lift kit Lowered Subframe Stadium LT Front Shocks Elka LT Rear Shock Elka LT Linkage Quad Tech Hood Quad Tech Seat Pro Armour Nerfs w/Heelguards Pro Armour front Bumper Tag +1 Stem 1 1/8th Pro Taper bars Freshen up the topend any other ods and ends I'll add to this list Before pics.. (from after the last build) [ATTACH]321.vB[/ATTACH][ATTACH]322.vB[/ATTACH]

http://www.offtopic.forum/uploads/imported/2012/09/Round2nonwebview11-1.jpg

Hurrican Issac**** Looks like the hurricane is making a path for the worse straight towards new orleans! Might stick this one out. Too many toys/animals to abandon. Wish me the best of luck guys!

Fuel Customs 3227 Producer Way Ste # 127 Pomona, CA 91768 909-594-6082 http://www.fuelcustoms.com garrett@fuelcustoms.com

Now thru Labor Day save 5% on everything, just enter this coupon code: laborday

Good afternoon every one, I have a problem with my 450r. I'm sort of uncomfortable with taking the swing arm/Axel apart while not having parts ready right here in the garage. I was riding today to see how the bike runs and it was kind of running sluggish. Replaced the gas+oil+filters (air/oil) and it ran better. However the Axel feels pretty loose. When i climbed hills or rode over any sort of slope/bumps my brake rotor and sprocket/chain kept hitting the skidplate. I'm able to lift one of the tires and see some play in the swing arm. I've included several photos here. What I'm seeing here... i think it's the rubber thing that protects the bearings to keep dirt/wat…

Ok guys havent been on here in a while but I got a question, well i mean more less i need your guy's thoughts...lol I was riding the other day at the track and my coil mounts broke off the frame so the coil just hung now i didnt know it but I rode it for another 2+ hours with it hanging other guys said they thought I knew about it so they didnt tell me. so my question is, It would be darn near impossible to weld those tiny tabs back on and even if It could be done my welding skills are horrible. but....since it hung there and started fine I had a plan what if I was to put the tabs back on (broken pieces) the coil just to ground the one side ground wire out on some metal a…

like the title says gonna be down there fri and sat the 24 and 25. group of four of us. we will be in a white 4door 03 f150 with. i need another honda in the group. ill be riding with a predator, z400, and a kfx450. come say hi if you'll be there, my name is cody.

Whos in? Lets set an off weekend date where we can go, have some fun and tool around, gets lots of good vid to have a buddy dune freq make a vid for us..... lets set a date, and get it going....... who is in and when for a couple day get away in GLamis???? this is a great vid to get pumped..... [video=youtube_share;C_MfY_pScPk]

ok guys like the tittle stated , im thinking about it since its wayy cheaper than amsoil , 1qt of amsoil is almost the same as the gallon of R.. but i have a few questions that i need answer... please answer them in order if possible and just to the point. if you want , give a lil statement on top and then the answers.. thanks for all the input guys: 1- What type of Rotella to use??? i have seen the rotella T (triple protection-this sounds good), the T5, T6 ,T1 2- what is the schedule maintenance with this oil? 3- its safe for BOTH sides ? 4- what weigth to get? i was thinking 15-40 i took this from Morgan, from the other thread, hes a experience builder …

Guys I'm gettin real bad clutch fade when I'm in tight spots on trails. I've ignored it long enough now I'm super annoyed. If I gotta stop to back it up in a hot spot it won't even hit neutral. Barely wants to go to second but with enough force it will. I have a grooved out clutch basket with brand new plates and what'll happen is the clutch lever is bottomed out but it's only opening the clutches up about half way. What can I do to fight heat issues once I install a new basket? I'm considering a Hinson Steel basket with OEM or Tusk Plates but is there any other clutch mods I can do to keep heat down? Also while we're on topic what are the benefits of the CRF…

I have a set of almost new smoothies that are buffed so thin they lose air really quick. Any of you guys use Slime or similar in your buffed dune tires to keep the air in?

Just picked up an 06 that was swapped over to a kicker... Has the stock carb on it and I'm swapping it out for the CRF carb I have with hotstart... I need the bottom of the ASV clutch perch with the hotstart lever. The clamp I have is without hotstart. Thanks..

the upcoming race in Rosarito, Baja, Mexico. and its looking good... the contingency will be behind The Papas&Beer..

anyone on here run the direct drive lockout clutch and and how do you like it i have been thinking about getting one mostly run drag's but do go out in the dune's

hey guys im in the market for one.. i been trying to find the thread that was here that someone(i think 450r did) that he had a led ligth bar in the front of his 450r, intead of the regular head unit... any help guys... thanks