Gear Heads Unite

Oregon Coast Powersports 541-271-3966 https://www.facebook.com/oregoncoastpowersports

This is a very common thing done on the TRX bike that requires a mod to make work properly. Installing aftermarket handlebars. First lets address the handlebars. Most everything is straight forward when installing your new bars but you will need to grind off the tang that is on the inside of you headlight switch housing. You can see in the pic below I use a small dremel with a sanding wheel. be careful not to grind to much or it wont tighten nicely. If this happen usually a couple wraps on the bar with electrical tape will fix this problem. http://www.offtopic.forum/uploads/imported/2012/04/IMAG0715-1.jpg http://www.offtopic.forum/uploads/imported/2012/04/IMAG…

I picked this quad up in December with the intention of building it up for myself. My wife rides and road this bike and wanted it. So it was perfect powerwise for her so I decided to leave it for her and we ran it on the Dyno. This bike had all the work done. I would have pulled it all apart when I got it as I would do a lot of modding to make it mine. however for her it has all the power she will ever need. So until it needs maintenance, it will not be pulled down. i called up Matt over Dynomite Performance and set up a time to run it. Made a few runs and heres what we got. Jetting was a little lean. Was going to leave it for a rebuild but since it is now her bik…

Reminder this is a BRAND SPANKIN NEW site and we appreciate any heads up to gliches that you guys may run into. We know that several of you had some troubles getting on the site last night and early this morning but we believe to have tracked that issue down and resolved it. Please make use of the Suggestions & Comments section, the best forums are open to all ideas

Just wanted to pop in and say Thanks for inviting us to be apart of your site. We are super backed up at the moment but we will try to do our best to come by and be apart of the site. Hopefully this one goes like it's intended and we can all learn some new info. Morgan Russell Demon Industries- Owner

Immortal ATV PO BOX 1053 Soquel,CA 95073 800-380-9646 http://www.immortalatv.com/index.php

JD Performance 951-676-7957 http://www.jdperformance.net/default.htm jdpatv@yahoo.com

Dynomite Performance ATV Phoenix, AZ 623-255-7096 https://www.facebook.com/pages/Dynomite-Performance-ATV/186189301416028

Stellar Machine and Performance 520-481-6946 http://www.stellarmachineandperformance.com https://www.facebook.com/pages/Stellar-Machine-and-Performance/145562265456768

I was going to post phone and contact info for Demon but I am sure he is moving and as an interim address for now. If he wants that up Ill post it. Im sure it is very temporary so do not know how long it will stay an interim address. Demon Industries 520-405-0335 https://www.facebook.com/pages/Demon-Industries/146734508696500

Hey guys I uploaded the app for the site on my iPhone and its workin pretty good. Will be a lot easier to be on my phone now. It was 1.99 at the apple store

http://www.woodwardspecialties.com/Fly-Racing-PIVOTAL-ROOST-GUARD-detail.htm?productId=17471398&catalogId=1902&fpg=1 Currently on Sale for $75.96- Use the promo code from my sig for an additional 5% off your entire order! FLY RACING PIVOTAL ROOST GUARD Innovative Pivoting Front and Back Panels for increased function and rider comfort Ultra Lightweight… Only 699 grams E-Z Adjust ratcheting closure system on shoulder and lower buckles makes entry and exit quick and easy especially when used with a neck brace Constructed of molded, impact resistant plastic Integrated hi-flow venting system Graphic printed interior, constructed of…

All Yuasa batteries are set to 20% off on my site thru 5/15/2012.... use the promo code from my sig and get another 5% off your entire order!!! http://www.woodwardspecialties.com/yuasa-results.htm

Had a customer bring me this bike to make sure the tuning, done by another shop (with no dyno), was good. needless to say, it was off and I got him where he needed to be. Mods list: 14:1 CP with smoky rings web 963 intake cam Dragonfire exhaust Uni filter, no box PC3 USB running on c12[ATTACH]57.vB[/ATTACH]

http://www.jetsuspension.com/jet/index.php

FSA 2012 schedule Dumont California - November 12th, 2011 Glamis California - Jan. 21st, 2012 Dumont California - March 17th, 2012 SM Nevada - September 22nd, 2012 Dumont California - November 10th, 2012

putting this up as I was impressed by the power out of this lil guy. 09 KFX450: Dasa pipe KMS built intake stage 3 hotcams PC5 [ATTACH]58.vB[/ATTACH]

"2012" CLASSES PRO DIVISION - $80.00 per class * Stock Bore/Stroke Class – OEM chassis, OEM modified motors with OEM bore/stroke running gas only- see approved FSA gas list. No weight limit, front nose/plastic required. Under 650 cc stock bore/stroke requirements • YFZ450 - 95 x 62 • YFZ450 - 95 x 63.4 • TRX400EX - 85 x 70 • TRX450R - 94 x 64.8 • TRX450R - 96 x 62 • LTZ400 - 90 x 62.6 • LT-R450 - 95.5 x 62.8 • KFX450R - 96 x 62.1 • DS450 - 97 x 60 • KTM 450XC - 89 x 72 • KTM 525XC - 95 x 72 (not eligible for stock bore/stroke class) • Predator 500 - 99.2 x 64.6 • Outlaw 450MXR - 89 x 72 • Outlaw 500 - 99 x 64.8 • Outlaw 525 - …

I picked up a black 06 for a great deal and it is BONE STOCK. makes more sense for my build as it will be replaced in every nook and cranny and built up into a duner.... that drags well. Does this make it a 2 trick pony? maybe only 1 1/2? http://www.offtopic.forum/uploads/imported/2012/04/5Ne5Z05H93I63J73o7c1u197c5c0fdf1712e8-1.jpg http://www.offtopic.forum/uploads/imported/2012/04/IMAG0895-1.jpg Plans so far are it will be stripped down to the bare frame, powder coated, long travel or wider arms. This one will be getting a +4 swingarm,+1 stem and 1 1/8 bars, and the motor will be built. 65hp built by a good proven builder. Best of all electric start now! Im go…

I know I'm kind of going above and beyond for a new website. But I'm willing to let 450rHQ have my quad for the summer to do any and all modifications to it they see fit. Any engine work, powder coating, etc. This includes permissions to do a full Build write up, photo and post on websites, magazines, tv ad's, etc.....All I ask is that it be completed by the start of Dune season.....and in return I will sport up to 2 450rHQ stickers on my quad.