Gear Heads Unite

guys this is a sick video that its a must for all race fans to own.. link to the store.. http://shop.race-dezert.com/products/dp10-dezert-people-10

AWS will be moving the site to a new server this weekend. In the process He will also be upgrading the software. There will be downtime, but, it should be minimal if He don't run into any problems. So don't sweat if the site is down for a bit!

I just picked up a bottle of muc off. This stuff is awesome. Spray it on let it sit for a while and hose it off no scrubbing involved. This was the easiest cleaning I've ever done on my quad. It's not cheap but it works well.

I've been taking a break from atvs, forums and wrenching for a while lately... Now I'm getting back into my 250R's and 450R's and have kinda hit a wall. The "no fun no more" wall. My 07 450R is a Demon SB/SS pump gas "sleeper" with right at 60 hp in it's current tune. The bike is fast, and the suspension works great for what I want it to do, but is boring to ride. I've gotten accustom to the power, and am now looking for more options. I'm wanting more power for the strip, but am curious about cost vs. benefit of going to a 480 or bigger. What would you do?

How or who, can close the gap on this current Champion? He is off the MAP! Sent by my iPhone!

I have read a lot of good stuff about the X-Rex and how it is the same tire as the Maxxis Razr. But they stopped making the Xrex, so I got the XC Master tires, which are supposedly the replacement. I like the 6 ply tires at that price, and I like that I have read about excellent wear and tremendous grip. Will let you know what I think. Ordered today for ~$145 to my door. Kick ass price.

Here a copy/paste from a the news paper... This is another race to look at guys.. Opinions guys..

I need like 4 stud bolts because some how I lost one and would like to have a few spare.

There is a new forum for the 250R. http://trx250r.org/content.php A lot of guys with great tech and talk. Alanbmx, I saw your post on that org. site. Hit up the new site, those boys will help you get that "R" going! :encouragement:

Funny story. The bike begun to run like crap. She would idle fine, but when given the throttle, would stumble and stutter. I thought maybe because of the recent high humidity, I needed a jetting adjustment. I chased the jetting, moving the needle around, no better. Then when I was inspecting the hot start plunger, I looked at the coil, the positive side connector was lose and arcing. Cleaned it up applied dielectric grease, problem solved. It appeared to act like a fuel issue. Just some information for the brethren! :encouragement:

Went to ET last night with nuckinfuts and a couple other guys... had a lot of fun and saw some pretty cool stuff... Click on the photos to see the videos some sort of car... never heard or saw any times, but it was fast Dustin handing it to a streetbike conversion I'm sure he'll chime in and give his times since I don't remember exactly what it was...

Motor: Cam Pipe piston cdi clutch head valves springs fcr All the good stuff Frame: titanium bolts all around pro armor bumper pro armor grab bar pro armor revolution nerf bars lowered subframe htmoto seat cover carbon fiber gusset the frame pc everything Factory backing graphics Drive: race tech shocks hiper wheels maxxie tires +3 lsr a arms +3 lsr axle lsr barring carrier Lsr anti fade Lsr +1 Stem six5design swing arm, and linkage precision pro steering stabilizer persicion bar clamps renthal 1 1/8 hi bend bars pro design kill switch asv shorty levers odi grips This isn't necessarily going to be fast but, I am h…

Heres my 08 450r Dyno sheet after being tuned by Ehs.Id like to thank Eric for taking us in on extremely short notice and Jeff at Ocp for the head work. [ATTACH]810.vB[/ATTACH]

I've been reading up some people's comments on the org about common tranny issues for 06+. I did not know this and my bike seems to be running smoothly as it should. I've never had a tranny failure in the past, what are the signs that i could look for. Far as i know, i don't see any metal shavings in the oil when i change it. Also I've been using Rotella oil for both sides along with Tusk oil filter. Realistically, what are the chances for my tranny to go bad, considering i use the clutch all of the time and rarely let other people ride my toy.

Hey guys so I figured Id post this here so everyone can see. Its a 1988 Chevy Silverado that me and my dad restored. Just finished painting last night. Once a week or too goes by Ill have it together and Ill post some more pictures. Its a 350 TBI 5.7L engine. We did 3 base coats of grey, 3 coats of black then toped it all off with 2 coats of clear. Looks good to me. Just need to give it a few days then do some wet sanding then a polish! What do you think??

looks like a huge portion of the dunes are reopening:applouse:, maybe, they have 90 days to appeal decision http://www.blm.gov/pgdata/etc/medialib/blm/ca/pdf/elcentro/planning/2010.Par.89984.File.dat/isdra_rod-ramp_final.pdf map http://www.glamisdunes.com/invision/index.php?act=attach&type=post&id=590744

Hey guys check out bionic band dot com. I have a few of their products and i think it's a great company. Science is a spectacular subject to learn from! Without science, we wouldn't have things! Starting with bionic band. Did you know that your body are infected by harmful frequencies every minute of your life? I'm talking about possible destructive vibrations or frequencies that come from cell phones, radio waves, magnetic radiation, computers and just about any other electronic devices. What these bands do is help contract those frequencies and stabilizes your body. The company offers bands that helps with arthritis, balance, strength, sleep and basically improves ou…

Ok guys he's a picture of what happened to my quad so any help ill be appreciated. Shipping to 88007

As the tittle says, I just came back from San felipe, and my wifes cousin locked the engine(no idea how, to be honest). So its rebuild time for my May race in Rocky Point. So questions: What piston to get and compresion? I want to keep it pump fuel.. 91oct What conecting rod to get? What cylinder to get? If there more than one brand.... and stock bore btw And I got everything else covered... Thanks guys

our next race if God permits it.. http://www.offtopic.forum/uploads/imported/2013/05/rosarito200_2013_zps35e1b486-1.jpg [ATTACH]804.vB[/ATTACH]