Front brake issues..........

[airmobile101]

Need some input. My honda has this lovely issue with air getting into the lines(so I think). If I let the bike sit for a week or so and grab the front brake lever, I have zero pressure! I have to pump it u a few times to get pressure. If Im racing, it will come and go. Not a good thing!

I have bleed the brakes millions of times, I zip tied the lever in the closed position with the reservoir open in hopes the air would escape( I left the bike like this for a freaking week!). But yet............. I cant get ride of this ****. I even did the reverse purge, etc......... You think I have a air leak or a component failure?

 

[Loud450man]

somthing has to be loose ,check around the block behind the steering stem .

 

[airmobile101]

Man, I checked to make sure all the copper crush washers where on, I checked everything and even tightened all the lines. Its driving me crazy!

 

[OTMTRX]

Master cylinder? Just a though..

 

[Deven]

Id guess a dead Master cylinder

 

[airmobile101]

Thats what I was thinking. It has to be the master cylinder or the gasket????????

 

[450Riot]

Might need a M/C Rebuild Kit. New Crush Washers? New Pistons?

 

[Deven]

I guess in theory it could be the caliper o rings etc. I would say Mc first though

 

[450Riot]

Sorry my browser must have needed to be refreshed. Didn't mean to be the 5th guy talking about the same master cyl topic haha.

 

[want2bfast]

Are you using a pump to bleed your brakes?

 

[airmobile101]

I'm using the sryinge Phoniex thingy????? It doesn't work for ****. I think Im gonna actually go buy a **** good vacuum pump.

 

[want2bfast]

Honestly I think that is the only way to go..

 

[APEDZ215]

id say defenitly the mc or something internal in it

 

[OTMTRX]

I think you need the full lot mate.. ..

As it happens I know someone who has a whole front brake set up for you...