New Crank and Piston! PICS!!

[nathan89]

UPS dropped of a box from Racer's Edge/Crankworks today! Figured I'd share some pics! The crank is an OEM crank with a stock length Carrillo rod, balanced and welded by Crankworks. The piston is a CP 14:1 ''Race'' version with a single compression ring and moly coated skirts. Piston also uses a DLC (Diamond-Like Coating) wrist pin. It is very dark in color. Check out the pictures!

 

[want2bfast]

Pretty

 

[D-Rock]

Looks like you got some good and pretty parts!

 

[450Riot]

And lots of work ahead of you. Doing it yourself?

 

[nathan89]

And lots of work ahead of you. Doing it yourself?

Yep. The crank and piston is the easy part... motor also has a completely ruined transmission and I have to replace EVERY single part of the trans... all the gears, washers, countershaft, mainshaft, shift forks, drum....etc nothing was reusable after it let go.

 

[450Riot]

What are you using for trans parts? OEM?

 

[nathan89]

Yeah OEM parts. If it lets go again we'll probably go with the Baldwin billet gear set.

 

[OTMTRX]

Sparks do a "hardened" gear set.. http://www.alwaysopenmall.com/layou...romFamily=0&ProductFamilyID=0&RelatedItemID=0

I can't tell if it's $275 for one gear or the set though... just fyi..

 

[KansasTRX450R-Rider]

it says set so I would guess all

 

[450r duner]

Oooo pretty! Just out of curiosity, how much did the rod run you? I've got a crank and piston, just wondering. Nice setup BTW

 

[450R]

looks just like what's in my motor.... nice parts!