The BEST Case Saver to get for your TRX450R

[Guest Deven]

If you own a TRX450R or TRX450ER you need to save your cases. Many people get suckered in to the billet case savers or think the stock case saver is adequate. Truth is in many cases if you lose a chain it will take out your cases costly you hundreds or even more in repair which to be done correctly is replacement.

 

You need to pick up either a UPP case saver or a MOOSE Case saver which is the brand pictured below. The case saver wraps around your shift shaft as well as fitting in to the nooks and crevices of you case making it absorb a LOT more impact.

 

http://www.offtopic.forum/uploads/imported/2012/04/IMAG0679-1.jpg

[OTMTRX]

X2 i got mine straight from UPP.. i don't know why but a few weeks later they sent me another. It was on Moose packaging like above. By far the best.. Do need to mod it slightly for 14t front.. But only takes a few mins. Still pretty damn sturdy too!

[grtrat1]

I thought a metal one would protect more? But Im a n00b what do I know...

[Guest Deven]

I thought a metal one would protect more? But Im a n00b what do I know...

 

The metal case saver mounts in just a couple points. So the impact of a broken chain puts a ton more pressure in the mounting bosses then if it form fitted to the case. Because of this the bosses often break taking out the two left side cases. the left inner and outer cases. The poly case savers fit in all the nooks and crannies and absorb much more of the impact often saving your cases in the event of the chain breaking.

 

the pretty ones are great for looks.

 

the poly savers are great for actually saving the case.

 

 

http://www.offtopic.forum/uploads/imported/2012/04/98B57CC7orig-1.jpg

[grtrat1]

Can you use the sprocket cover with it?

[El Mamito USMC]

get the TM works , its the sh!t.... hit todd @Immortalatv and you wont regret it...

[ridinredjav]

i have the tm design works, its poly also

[want2bfast]

Holtz makes a good one.. Absolutely dont use ones w/ spacers.

[Junk94]

Holtz's are on sale for 15 bucks right now FYI

[ridingred]

where at Junk? My 450 still has the stock one, if you guys don't think that's adequite i'll be purchasing a new one. Also, with the stock 05 sprocket setup which is 14/38 will most of these bolt right on or do they need modding like a previous post mentioned.

[Junk94]

http://www.holzracingproducts.com/store/index.php?main_page=index&cPath=21_28&zenid=6fb26bf1f30c0d0d6a5c2c11f9a99b0d

 

The picture is of a 06+, but says 04-05, they also have their stems onsale too. I make my own, cause I am cheap like that and have the material, so going a 14 or 13 didnt matter to me. And no I will not make you one for 15 bucks either fool

[ridingred]

thanks for the link.

[RR450]

Holtz makes a good one.. Absolutely dont use ones w/ spacers.

 

Holtz's are on sale for 15 bucks right now FYI

 

Holtz are very good and you can't beat the $15.

[Guest Deven]

That is a GREAT deal

[want2bfast]

124 buck for an antivibe stem.. Crazy..

[Guest Deven]

124 buck for an antivibe stem.. Crazy..

 

Still need the mount but thats under 2 bills for an antivibe stem

[StonedInNy]

UPP case savers there is no better

[rocknhorse76]

Definitely the UPP or Moose (which are both made by UPP). BTW, that's my quad in the pic of the casesaver mounted up! :lhdevil:

[TheRedBaron]

What's the price on the upp and moose case saver ?

[quadnut]

I got mine for about $ 45 with shipping !

[rocknhorse76]

Yeah, you should be able to find one for around that price if you look around.

[alanbmx]

My Moose poly case saver was one of my first mods. Don't leave home without one:twak:

[Immortal ATV]

TMD poly is great, slap a chain guide on the swingarm too and thrown chains won't happen!

[gunny]

i got a tm design on ebay for 8 bucks shipped. it was covered in dirt when i got it but absolutely perfect condition. im a sucker for bargains

[Bak075]

I use a TMD as well, think i paid about 15 bucks.