450ER Starter Clutch Replacment Info and Part numbers

[woodwardspecialties]

Here is a list of what we replaced:

 

11352-HP1-670 OEM Honda o ring- clutch outter cover o ring

19226-MEB-670 Gasket (water pump cover)

The above were optional- as you do not HAVE to remove the water pump cover and outer clutch cover, however i chose to replace them while i was there.

The above parts are $8.66 total, so i feel its a no-brainer.

 

Below is a MUST to do the job correctly: ($350.34 for the parts listed below)

11394-HP1-600 Gasket Right Cover (clutch side cover gasket)

28110-MEY-670 Gear 35T (starter clutch)

28115-MEY-670 Clutch Outer (starter clutch)

28120-HP1-602 Gear (starter clutch)

28125-MEY-671 Clutch One Way (starter clutch)

90461-KZ3-J10 Lock Washer (clutch inner hub lock washer)

91012-PN6-701 Bearing (starter clutch)

 

It will greatly help to have the following specialty tools:

-Torque Wrench (7 ft lbs up to 80 ft lbs is needed)

-Clutch Basket holder tool (you can manage without, however it can be a pain)

-Compression tester to reset your auto decomp

 

If all goes smooth, your first time would take 2-3 hours. Now that i have done it, its probably a 2 hour job at MOST.

 

 

If you choose to order the parts through us, it takes me about a week to get them in. I will also include copies of the OEM service manual pages so you have them for install reference.

 

 

****Make sure your valves are set correctly.... that is a big reason that the starter clutch goes bad!!!