FS: 42.5mm Bored FCR Carb w/ NOSS adapter and TPS re-wired

ghott · November 26, 2012

SOLD SOLD SOLD SOLDSOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD

Up for sale is a very nice RAGE bored FCR carburetor. It looks to be a hybrid taper/straight bore carb. It measures 43.5mm on the intake side and 42.5mm on the cylinder head side. Great upper to mid-size FCR carb, just not big enough for my drag bike. Price is SOLD

Here's the info on the carb:

- Originally a 40mm FCR carb off a '02 - '05 Honda CRF450R dirt bike

- RAGE ATV hybrid taper/straight bore

- 43.5mm on the intake side, 42.5mm on the cylinder head side

- NOSS adapter epoxied in place and bored to match (has a few small knicks on the right side of the adapter, see pictures; doesn’t affect anything...you could hit them with a file if they bothered you)

- TPS has been re-wired and ready to go for the 04/05 TRX450R's...plug and play

- Comes with carb-to-head rubber boot and clamps

- Has allen cap screws in the float bowl (much less likely to strip than the phillips screws)

- No cracks, stripped threads, or stripped bolts/heads

- I have not installed or tested this on my bike, but I did tear it down and it is clean on the inside

- This carb allows you to use your stock hot start cable and stock throttle cable.

Jetting:

Main - #185

Pilot - #42

Needle - NCYQ on 4th clip from top

Leak - #55

A/F Screw - 2.5 turns out