Building the MX bike

450Riot

450Riot

New member
You still have a bit of a lean stutter around quarter throttle eh? Right after you turned around on the road there she sounded like it was starving.

I know you were (are?) having jetting issues. Was this vid before or after you played with jetting?

 
TP Racing

TP Racing

Active Members
You still have a bit of a lean stutter around quarter throttle eh? Right after you turned around on the road there she sounded like it was starving.
I know you were (are?) having jetting issues. Was this vid before or after you played with jetting?
Click to expand...
I am still playing with the jetting. I am actually in the process of getting a dyno session scheduled at Rossier. It'll be done right then

 
Baileyguns

Baileyguns

Active Members
I really think that's your best bet... Why gamble on all that money and time.

When you get it done ask them about rejetting for summer too. You're winter jetting will be rich for summer temps.

 
TP Racing

TP Racing

Active Members
I really think that's your best bet... Why gamble on all that money and time.
When you get it done ask them about rejetting for summer too. You're winter jetting will be rich for summer temps.
Click to expand...
Yeah I think I'll take the good advice! There only a couple hours away and very nice people to deal with. We'll see what there dyno reads on my bike to. I always like to compare

 
TP Racing

TP Racing

Active Members
looks good man but needs jeetted bad sounds lean...
Click to expand...
It's gonna be hitting the dyno wed at noon. I'm not gonna take the chances. I'm gonna take Bailys wise advice and not take the chance of blowing up or melting the piston down.

 
TP Racing

TP Racing

Active Members
Are you going to put any graphics on it? Something with some orange in it would really set it off..
Is the front wider then the rear or is it just the picture?
Click to expand...
Dang this place died...

Here's my graphics that I will be running for the 2013 season.

image-891592191.jpg

 
F-Red

F-Red

New member
Finally! Something to read and reply. Looks good. I'm not an orange fan, unless it's on the Miami Hurricanes uniforms! :gr_wink:

As long as you like it, who cares what I think. :thumb: Good luck with your season.

 
TP Racing

TP Racing

Active Members
Here she is. Dang close to getner done
Click to expand...
Well ill be tearing the motor apart in the coming weekends as I goofed up.

When I installed my hc2 I did not have the Allen bolt that holds the decompressor tight enough, allowing for the decompressor arm to swing out swing out and rub my valve cover and shave a bunch of metal through my motor. Ill be replacing seals and main bearings. Until I get in the motor and see if there was any additional damage.

 
Baileyguns

Baileyguns

Active Members
Was it a new cam? It sounded like some of the new cams had an issue with the machining/casting on the decomp side if I read it right... There were a few guys on the org talking about it a couple weeks ago.
 
TP Racing

TP Racing

Active Members
Was it a new cam? It sounded like some of the new cams had an issue with the machining/casting on the decomp side if I read it right... There were a few guys on the org talking about it a couple weeks ago.
Click to expand...
Cam was brand new. I did not catch the topic on the org I guess.

I'm gonna check everything out again tis weekend hopefully. I was to ****** off last weekend to even want to look at it. Made me sick to my stomach lol. Something soo stupid I'd making me have to tear the whole motor down.

 
You must log in or register to reply here.
Top Bottom